Avant la virtualisation, existaient les serveurs physiques. Ces serveurs physiques étaient destinés à héberger des services (Applications, BDD etc…) et nous anticipions les besoins en terme de ressources (CPU, RAM, réseau, stockage etc…) afin de pouvoir répondre à toutes éventualités de montée en charge du service sans avoir à éteindre le serveur pour rajouter de la ressource quelle quelle soit.
Nous sommes aujourd’hui et depuis plusieurs années maintenant, à l’ère de la virtualisation et les comportements n’ont guère changé ce qui est un vrai problème quand on virtualise les services ou plus précisément quand on virtualise les serveurs portant ces services.
La gestion des ressources dans un environnement virtuel:
Il faut rappeler que les ressources disponibles en environnement virtuel sont très agiles et plus précisément l’ajout de ressources à chaud (Machine Virtuelle allumée) est possible mais la réduction de certaines ressources (CPU, RAM etc…) passe par une extinction de la dite machine virtuelle ce qui est problématique en environnement de production.
Faisons une liste des mauvaises pratiques lors de la création d’une machine virtuelle
Une autre mauvaise pratique lié à l’hyperthreading
Avec les pratiques évoquées ci dessus vous n’êtes pas à l’abri d’investir dans une infrastructure virtuelle prévue pour une centaine de machines virtuelle pour au final en avoir que 70 qui puissent s’exécuter sans problème de performances.
Voyons maintenant les bonnes pratiques
Vous en conviendrez qu’il est inutile d’acheter et d’installer un lecteur de disquette sur un ordinateur portable aujourd’hui si vous en avez pas l’utilité alors il en est de même pour les machines virtuelles. Nous sommes capable aujourd’hui d’ajuster à la hausse les ressources des machines virtuelles sans avoir à les redémarrer (contrairement à une réduction) donc il est inutile de penser que comme vous provisionnez une machine virtuelle sous Microsoft Windows 2012R2, il vous faudra la configurer avec 2 vCPU et 4 GB de RAM.
Cette variable permet de diviser les objets en plusieurs parties et de les répartir sur plusieurs disques au sein du Cluster.
Example : StripeWidth=3, NumberOfFailuresToTolerate (FTT) = 1
Prenant en compte un Cluster de 3 nœuds et chaque nœud possède un SSD pour le “Cache Tiers” et 3 disques mécaniques pour le “Capacity Tiers”. Cette configuration est effectivement juste car pour la première copie de la VM, les 3 “Stripes” seront partagés sur trois disques appartenant au même nœud et pour le Replica de la VM, les 3 “Stripes” seront répartis sur les 3 disques d’un second nœuds du Cluster.
Si pour la même configuration vous configurez le StripeWidth=4, les “Stripes” d’un même objet pourrons se retrouver sur plusieurs nœuds et donc la variable NumberOfFailuresToTolerate (FTT) = 1, ne pourra plus être respectée car les datas d’une même VM pourront être à cheval sur plusieurs nœuds..
Dans la dernière version de VMware Virtual SAN, une multitude d’outils et de nouveautés ont été ajouté afin de valider et tester votre configuration matériel et software.
Pour l’ensemble des tests, j’utilise un Datacenter mobile équipé comme suit :
4 Serveurs HP DL360 Gen9:
2 Processeurs E5-2620v3
128 GB ram (HP 8GB 2Rx8 PC4-2133P-R)
1 HP 200GB 6G + 1 HDD 1To
8 ports HP 1Gb Ethernet 4P + 2 ports HP Ethernet 10Gb 2P 560SFP+
2 ports HP 82Q 8Gb Dual Port PCI-e FC HBA
1 Serveur DELL r210II:
Dédié à Veeam en tant que proxy externe
1 Switch BROCADE ICX 7450-48P:
48 ports Ethernet 1 Gb/s
4 ports SFP 10 Gb/s
2 ports QSFP+ 40 Gb/s
1 Switch HPE FF 5700-32XGT-8XG-2QSFP+ Sw:
32 ports 10 Gb/s
8 ports SFP 10 Gb/s
2 ports QSFP+ 40 Gb/s
1 Baie Purestorage m20 (Full Flash):
3To + Déduplication
Il vous est possible de contrôler, valider le choix et la configuration matériel, les prérequis à la création d’un Cluster VMware Virtual SAN.
Vous avez la possibilité de contrôler les prérequis réseau, le choix des disques, la configuration du cluster, les limites d’acceptation de tolérance de panne, la HCL de Virtual SAN et l’activation du service de performances.
Dans la dernière version de Virtual SAN, un outil très intéressant a vu le jour Les “Tests Proactifs”.
Il vous offre 3 tests:
D’autres articles sur VMware Virtual SAN suivront alors n’hésitez pas consulter mon site régulièrement ou à me demander un test sur ma page de contact.
VMware Virtual SAN is radically simple, enterprise-class storage for hyper-converged infrastructure (HCI). Uniquely embedded in the VMware vSphere hypervisor, Virtual SAN delivers flash-optimized, high-performance storage. It leverages commodity x86 server components to drastically lower TCO by up to 50% and deliver all-flash solutions for as low as half the price of competitive hybrid HCI systems. Seamless integration with vSphere and the entire VMware stack makes it the simplest storage platform for business-critical workloads, virtual desktop infrastructure (VDI), remote office IT, disaster recovery, and DevOps infrastructures. Customers of all industries and sizes trust Virtual SAN to run their most important applications.
Use cases for Virtual SAN include mission-critical applications, test and development, remote and branch offices, disaster recovery sites, and virtual desktop infrastructure (VDI). Virtual SAN supports a number of configuration options such as 2-node clusters for small implementations at remote offices to clusters as large as 64 nodes delivering over 6 million IOPS. Stretched clusters can also be configured to provide resiliency against site failure and workload migration with no downtime for disaster avoidance. VMware provides the market-leading HCI platform powered by vCenter Server, vSphere and Virtual SAN.
New in vSphere 6.5 and Virtual SAN 6.5 is the ability to separate witness network traffic from the network that connects the two physical hosts in a two-node cluster. This configuration option reduces complexity by eliminating the need to create and maintain static routes on the physical hosts. Security is also improved as the data network (between physical hosts) is completely separated from the WAN for witness traffic.
A Virtual SAN Witness is a virtual appliance that is utilized in stretched clusters and two-node configurations. The witness acts as a “tie-breaker” in certain events such as a network partition between hosts in a 2-node cluster. The witness virtual appliance stores metadata such as witness components. It does not store data components such as VM Home and virtual disk (VMDK) files.
Two-node VSAN cluster configurations are commonly used for branch offices and remote locations running a small number of virtual machines. A witness virtual appliance must not run on either of the two physical nodes in the cluster as this would defeat the purpose of the witness. The recommended location for the witness virtual appliance(s) is a primary data center connected to the remote locations by a WAN. Having the witness virtual appliances centrally located facilitates ease of management.
Physical Hosts in a two-node cluster can be connected using crossover cables. Organizations with existing 100Mbps or 1Gbps networking hardware can continue to utilize this equipment and enable 10Gbps connections for Virtual SAN and vMotion. All-flash Virtual SAN configurations (including two-node) require 10Gbps connectivity and vMotion performance is enhanced using faster connections between hosts. Connection reliability between the physical hosts is also improved with direct connections.
As with any storage fabric, redundant connections are recommended. In addition to providing resiliency against a NIC or cable failure, two connections between physical hosts enables administrators to separate Virtual SAN from vMotion traffic. It is possible for vMotion to saturate a 10Gbps link when migrating multiple virtual machine simultaneously, e.g., when a host is put into maintenance mode. This scenario has the potential to impact Virtual SAN performance while the migrations are taking place. The figure below shows one possible configuration that would prevent Virtual SAN and vMotion from using the same connection unless there is a NIC or cable failure.
Block storage can be provided to physical workloads using the iSCSI protocol. The Virtual SAN iSCSI target service provides flexibility and potentially avoids expenditure on purpose-built, external storage arrays. In addition to capital cost savings, the simplicity of Virtual SAN lowers operational costs.
The Virtual SAN iSCSI target service is enabled with just a few mouse clicks. CHAP and Mutual CHAP authentication is supported. Virtual SAN objects that serve as iSCSI targets are managed with storage policies just like virtual machine objects.
After the iSCSI target service is enabled, iSCSI targets and LUNs can be created. The screen shot below shows target and LUN configuration options.
The last step is adding initiator names or an initiator group, which controls access to the target, as shown here.
In nearly all cases, it is best to run workloads in virtual machines to take full advantage of Virtual SAN’s simplicity, performance, and reliability. However, for those use cases that truly need block storage, it is now possible to utilize Virtual SAN iSCSI Target Service.
New application architecture and development methods have emerged that are designed to run in today’s mobile-cloud era. For example, “DevOps” is a term that describes how these next-generation applications are developed and operated. “Container” technologies such as Docker and Kubernetes are a couple of the many solutions that have emerged as options for deploying and orchestrating these applications. VMware is embracing these new application types with a number products and solutions. Here are a few examples:
Photon OS – a minimal Linux container host optimized to run on VMware platforms.
Lightwave – an open source project comprised of enterprise-grade identity and access management services.
Photon Controller – a distributed, multi-tenant ESXi host controller optimized for containers.
Cloud native applications naturally require persistent storage just the same as traditional applications. Virtual SAN for Photon Controller enables the use of a Virtual SAN cluster in cloud native application environments managed by Photon Controller. Virtual SAN for Photon Controller includes developer-friendly APIs for storage provisioning and consumption. APIs and a graphical user interface (GUI) geared toward IT staff are also included for management and operations.
vSphere Integrated Containers Engine is a container runtime for vSphere, allowing developers familiar with Docker to develop in containers and deploy them alongside traditional virtual machine workloads on vSphere clusters. vSphere Integrated Containers Engine enables these workloads to be managed through the vSphere GUI in a way familiar to vSphere admins. Availability and performance features in vSphere and Virtual SAN can be utilized by vSphere Integrated Containers Engine just the same as traditional virtual machine environments.
Docker Volume Driver enables vSphere users to create and manage Docker container data volumes on vSphere storage technologies such as VMFS, NFS, and Virtual SAN. This driver makes it very simple to use containers with vSphere storage and provides the following key benefits:
Virtual SAN along with the solutions above provides an ideal storage platform for developing, deploying, and managing cloud native applications.
VMware’s PowerCLI implementation is one of the most widely adopted extensions to the framework. It features a plethora of functions that abstract the vSphere API down to simple and powerful cmdlets including a number of cmdlets for Virtual SAN. This makes it easy to automate a number of actions from simply enabling Virtual SAN to deployment and configuration of a Virtual SAN stretched cluster. Here are a few examples of what can be accomplished with Virtual SAN and PowerCLI:
With each new release of vSphere PowerCLI and Virtual SAN APIs, the functionality becomes more robust. Cmdlets have been added and improved for these and many other operations:
vSphere administrators and DevOps shops can utilize these new cmdlets to lower costs by enforcing standards, streamlining operations, and enabling automation for vSphere and Virtual SAN environments.
Disk drives have been using a native 512-byte sector size. Due to increasing demands for larger capacities, the storage industry introduced new formats that use 4KB physical sectors. These are commonly referred to as “4K native” drives or simply “4Kn” drives. Some 4Kn devices include firmware that emulates 512 byte (logical) sectors while the underlying (physical) sectors are 4K. These devices are referred to as “512B emulation” or “512e” drives.
vSphere 6.5 and Virtual SAN 6.5 support the use of 512e drives. The latest information regarding support for these new drive types can be found in this VMware Knowledge Base Article: Support statement for 512e and 4K Native drives for VMware vSphere and VSAN (2091600)
Virtual SAN clusters consist of any number of physical server hosts from two to 64. Each host contains flash devices (all-flash configuration) or a combination of magnetic disks and flash devices (hybrid configuration) that contribute cache and capacity to the Virtual SAN distributed datastore. Each host has one to five disk groups. Each disk group contains one cache device and one to seven capacity devices.
For all-flash configurations, the flash device(s) in the cache tier are used for write caching only as read performance from the capacity flash devices is more than sufficient. Two grades of flash devices are commonly used in an all-flash Virtual SAN configuration: Lower capacity, higher endurance devices for the cache layer and more cost effective, higher capacity, lower endurance devices for the capacity layer. Writes are performed at the cache layer and then de-staged to the capacity layer, only as needed. This helps extend the usable life of the lower endurance flash devices in the capacity layer.
In a hybrid configuration, one flash device and one or more magnetic drives are configured as a disk group. A disk group can have up to seven magnetic drives for capacity. One or more disk groups are utilized in a vSphere host depending on the number of flash devices and magnetic drives contained in the host. Flash devices serve as read and write cache for the Virtual SAN datastore while magnetic drives make up the capacity of the datastore. By default, Virtual SAN will use 70% of the flash capacity as read cache and 30% as write cache.
Virtual SAN Ready Nodes are typically the easiest, most flexible approach when considering deployment methods. Virtual SAN Ready Nodes are x86 servers, available from all of the leading server vendors that have been pre-configured, tested and certified for Virtual SAN. Each Ready Node is optimally configured for Virtual SAN with the required amount of CPU, memory, network, I/O controllers and storage devices.
Turn-key appliances such as Dell EMC VxRail provide a fully-integrated, preconfigured, and pre-tested VMware hyper-converged solution for a variety of applications and workloads. Simple deployment enables customers to be up and running in as little as 15 minutes.
Custom configurations using jointly validated components from a number of OEM vendors is also an option. The Virtual SAN Hardware Quick Reference Guide provides some sample server configurations as directional guidance and all components should be validated using the VMware Compatibility Guide for Virtual SAN.
All-flash Virtual SAN configurations require 10Gb network connectivity. 1Gb connections are supported for hybrid configurations although 10Gb is recommended. Currently, Virtual SAN requires the use of multicast on the network. Multicast communication is used for host discovery and to optimize network bandwidth consumption for the metadata updates. This eliminates the computing resource and network bandwidth penalties that unicast imposes in order to send identical data to multiple recipients.
Support for using crossover cables in a 2-node cluster is new in Virtual SAN 6.5. Utilizing crossover cables eliminates the need to procure and manage a 10Gb network switch for these hosts, which lowers costs – especially in scenarios such as remote office deployments. This configuration also improves availability and provides complete separation of Virtual SAN witness traffic from data traffic.
For more information on Virtual SAN network requirements and configuration recommendations, see the Virtual SAN Network Design Guide.
Storage in a hyper-converged infrastructure (HCI) requires compute resources that have been traditionally offloaded to dedicated storage arrays. Most HCI solutions require the deployment of storage virtual appliances to some or all of the hosts in the cluster to provide storage services to each host. These virtual appliances typically require CPU and/or memory reservations to avoid resource contention, which can result in performance degradation. Running a virtual appliance on every host in the cluster reduces the overall amount of compute resources available to run regular virtual machine workloads. Consolidation ratios will likely be lower and total cost of ownership rises when these storage virtual appliances are present and competing for the same resources as regular virtual machine workloads.
Storage virtual appliances can also introduce additional latency, which negatively affects performance. This is due to the number of steps required to handle and replicate write operations as shown in the figure below.
Virtual SAN does not require the deployment of storage virtual appliances or the installation of a vSphere Installation Bundle (VIB) on every host in the cluster. Virtual SAN is embedded in the vSphere kernel and typically consumes less than 10% of the compute resources on each host. Virtual SAN does not compete with other virtual machines for resources and the IO path is shorter.
A shorter IO path and the absence of resource-intensive storage virtual appliances enables Virtual SAN to provide extreme performance with minimal overhead. Higher consolidation ratios translate into lower total costs of ownership.
Virtual SAN is built into vSphere. Virtual SAN is enabled with just a few mouse clicks. There is no requirement to install additional software and/or deploy virtual storage appliances to every host in the cluster. Simply click the Enable Virtual SAN checkbox to start the process. Deduplication and compression can also be enabled at that time.
The next step is claiming local storage devices in each host for the Virtual SAN cache and capacity tiers. One or more disk groups are created in each host. Each disk group contains one cache device (flash) and one or more capacity devices (flash or magnetic). Virtual SAN pools these local storage device together to create a pool of shared storage.
The process of enabling Virtual SAN takes only a better of minutes. This is a tribute to the simplicity of Virtual SAN – especially when you compare it to other enterprise-class hyper-converged and traditional storage systems, which typically take much longer to set up.
Virtual SAN 6.2 features a comprehensive health service that actively tests and monitors a number of items such as hardware compatibility, network connectivity, cluster health, and capacity consumption. The health service is enabled by default and configured to check the health of the Virtual SAN environment every 60 minutes.
The Health service is quite thorough in the number of tests it performs. As an example, proper network configuration is essential to a healthy Virtual SAN cluster and there are 11 tests in the“Network” section of the Virtual SAN Health user interface.
If an issue is detected, a warning is visible in the Virtual SAN user interface. Clicking on the warning provides more details about the issue. For example, a controller driver that is not on the hardware compatibility list (HCL) will trigger a warning. In addition to providing details about the warning, Virtual SAN Health also has an“Ask VMware” button, which brings up the relevant VMware Knowledge Base article.
vSphere and Virtual SAN support a wide variety of hardware configurations. The list ofhardware components and corresponding drivers that are supported with Virtual SAN can be found in the VMware Compatibility Guide. It is very important to use only hardware, firmware, and drivers found in this guide to ensure stability and performance. The list of certified hardware, firmware, and drivers is contained in a hardware compatibility list (HCL) database. Virtual SAN makes it easy to update this information, for use by the Health Service tests. If the environment has Internet connectivity, updates can be obtained directly from VMware. Otherwise, HCL updates can be downloaded to enable offline updates.
If an issue does arise that requires the assistance of VMware Support, it is easy to upload support bundles to help expedite the troubleshooting process. Clicking the “Upload Support Bundles to Service Request…” button enables an administrator to enter an existing support request (SR) number and upload the necessary logs with just a few mouse clicks.
Figure x. Virtual SAN HCL Database and Support Assistant
Virtual SAN proactive tests enable administrators verify Virtual SAN configuration, stability, and performance to minimize risk and confirm that the datastore is ready for production use. Three proactive tests are available:
VM creation test
Multicast performance test
Storage performance test.
The VM creation test creates and deletes a small virtual machine on each host confirming basic functionality. The multicast test verifies multicast is working properly on each host and performance meets Virtual SAN requirements. The following figure shows the results of a VM creation test.
The storage performance test is used to check the stability of the Virtual SAN cluster under heavy I/O load. There are a number of workload profiles that can be selected for this test as shown below. Keep in mind the storage performance test can affect other workloads and tasks. This test is intended to run before production virtual machine workloads are provisioned on Virtual SAN.
Capacity overviews are available in the Virtual SAN user interface making it easy for administrators to see used and free space at a glance. Deduplication and compression information is also displayed.
Information is also available showing how much capacity various object types are consuming. Note that percentages are of used capacity, not of total capacity.
This list provides more details on the object types in the Used Capacity Breakdown chart:
Virtual disks: Virtual disk consumption before deduplication and compression
VM home objects: VM home object consumption before deduplication and compression
Swap objects: Capacity utilized by virtual machine swap files
Performance management objects: When the Virtual SAN performance service is enabled, this is the amount of capacity used to store the performance data
File system overhead: Capacity required by the Virtual SAN file system metadata
Deduplication and compression overhead: deduplication and compression metadata, such as hash, translation, and allocation maps
Checksum overhead: Capacity used to store checksum information
Other: Virtual machine templates, unregistered virtual machines, ISO files, and so on that are consuming Virtual SAN capacity
A healthy Virtual SAN environment is one that is performing well. Virtual SAN includes a number of graphs and data points that provide performance information at the cluster, host, virtual machine, and virtual disk levels. Time Range can be modified to show information from the last 1-24 hours or a custom date and time range.
The performance service is enabled at the cluster level. The performance history database is stored as a Virtual SAN object independent of vCenter. A storage policy is assigned to the object to control space consumption, availability, and performance of that object. If the object becomes unavailable, performance history for the cluster cannot be viewed until access to the object is restored.
The performance service is turned off by default. A few mouse clicks are all that is needed to enable the service.
At the cluster level, the performance monitoring service shows performance metrics for virtual machines running on Virtual SAN. These metrics provide quick visibility to the entire Virtual SAN cluster. A number of graphs are included such as read and write IOPs, read and write throughput, read and write latency, and congestion.
Backend consumption stems from activities such as metadata updates, component builds, etc. For example, a virtual machine with a number of failures to tolerate set to 1 with a failure tolerance method of RAID-1 (Mirroring). For every write IO to a virtual disk, two are produced on the backend – a write to each component replica residing on two different hosts.
In addition to virtual machine consumption and backend performance metrics, disk group and individual disk performance information is available at the host level. Seeing metrics for individual disks eases the process of troubleshooting issues such as failed storage devices.
Virtual SAN performance information for individual virtual machines and virtual disks. Metrics include IOPS, throughput, and latency. The figure below shows virtual disk-level Virtual SCSI throughput and latencies for reads and writes.
Figure x. Virtual Disk Performance
Traditional storage models utilize LUNs or volumes. A LUN or a volume is commonly configured with a specific disk configuration such as RAID to provide a specific level of performance and availability. The challenge with this model is each LUN or volume is confined to providing only one level of service regardless of the workloads that it contains. This leads to the provisioning of numerous LUNs or volumes in an attempt to provide the right levels or storage services to each workload. Maintaining a large number of LUNs or volumes leads to management complexity. Deployment and management of workloads and storage in traditional storage environments can be time consuming and error prone.
Storage Policy Based Management (SPBM) enables precise control of the storage services. Similar to other storage solutions, Virtual SAN provides services such as availability level, striping for performance, and the ability to limit IOPS. Policies that contain one or more rules are created using the vSphere Web Client.
These policies are assigned to virtual machines and individual objects such as a virtual disk. Storage policies can easily be changed and/or reassigned if application requirements change. These changes are performed with no downtime and without the need to migrate (Storage vMotion) virtual machines from one LUN or volume to another. This approach makes it possible to assign and modify service levels based on specific application needs even though the virtual machines reside on the same datastore.
Virtual SAN features an extensive management API and multiple software development kits (SDKs) to provide IT organizations options for rapid provisioning and automation. Administrators and developers can orchestrate all aspects of installation, configuration, lifecycle management, monitoring, and troubleshooting of Virtual SAN environments. This is especially useful in large environments and geographically disbursed organizations to speed up deployment times, reduce operational costs, maintain standards, and orchestrate common workflows.
SDKs are available for several programming languages including .NET, Perl, and Python. They are available for download from VMware Developer Center and include libraries, documentation, and code samples. For example, this Python script can be used to generate Virtual SAN capacity information: Virtual SAN Capacity – Total and Free from vCenter
Virtual SAN APIs can also be accessed through vSphere PowerCLI cmdlets. IT administrators can automate common tasks such as assigning storage policies and checking storage policy compliance. Consider a repeatable task such as deploying or upgrading two-node Virtual SAN clusters at 100 retail store locations. Performing each one manually would take a considerable amount of time. There is also a higher risk of error leading to non-standard configurations and possibly downtime. vSphere PowerCLI can instead be used to ensure all of the Virtual SAN clusters are deployed with the same configuration. Lifecycle management, such as applying patches and upgrades, is also much easier when these tasks are automated.
This video demonstrates a number of operations from creating a new cluster to configuring Virtual SAN using just a few lines of vSphere PowerCLI code:
vSphere PowerCLI: Creating a Cluster and Configuring Virtual SAN
Virtual SAN (VSAN) is an object datastore with a mostly flat hierarchy of objects and containers (folders). Items that make up a virtual machine (VM) are represented by objects. These are the most common object types you will find on a VSAN datastore:
VM Home, which contains virtual machine configuration files and logs such as the VMX and NVRAM files
Virtual Disk (VMDK)
Delta Disk (snapshot)
Memory Delta, which is present when the checkbox to snapshot a VM’s memory is checked
There are a few other objects that might be found on a VSAN datastore such as the VSAN performance service database and VMDKs that belong to iSCSI targets.
Each object consists of one or more components. The number of components that make up an object depends primarily on a couple things: The size of the objects and the storage policy assigned to the object. The maximum size of a component is 255GB. If an object is larger than 255GB, it is split up into multiple components. The image below shows a 600GB virtual disk split up into three components.
In most cases, a VM will have a storage policy assigned that contains availability rules such as Number of Failures to Tolerate and Failure Tolerance Method. These rules will also affect the number of components that make up an object. As an example, let’s take that same 600GB virtual disk and apply the Virtual SAN Default Storage Policy, which uses the RAID-1 mirroring failure tolerance method and has the number of failures to tolerate set to one. The 600GB object with three components will be mirrored on another host. This configuration provides two full copies of the data distributed across two hosts so that the loss of a disk or an entire host can be tolerated. Below is an image showing the six components (three on each host). A seventh component, the witness, is created by VSAN to “break the tie” and achieve quorum in the event of a network partition between the hosts. The witness object is place on a third host.
In this last example of component placement, we take the same 600GB virtual disk and apply a storage policy with RAID-5 erasure coding (Failures to Tolerate = 1). The object now consists of four components – three data components and a parity component – distributed across the four hosts in the cluster. If disk or host containing any one of these components is offline, the data is still accessible. If one of these components are permanently lost, Virtual SAN can rebuild the lost data or parity component from the other three surviving components.
Virtual SAN requires a minimum number of hosts depending on the failure tolerance method and number of failures to tolerate (FTT) configurations. For example, a minimum of three hosts are needed for FTT=1 with RAID-1 mirroring. A minimum of four hosts are required for FTT=1 with RAID-5 erasure coding. More implementation details and recommendations can be found in the Virtual SAN Design and Sizing Guide.
“Fault domain” is a term that comes up fairly often in availability discussions. In IT, a fault domain usually refers to a group of servers, storage, and/or networking components that would be impacted collectively by an outage. A very common example of this is a server rack. If a top-of-rack (TOR) switch or the power distribution unit (PDU) for a server rack would fail, it would take all of the servers in that rack offline even though the servers themselves are functioning properly. That server rack is considered a fault domain.
While the failure of a disk or entire host can be tolerated, what if all of these servers are in the same rack and the TOR switch goes offline? Answer: All hosts are isolated from each other and none of the objects are accessible. To mitigate this risk, the servers in a Virtual SAN cluster should be spread across server racks and fault domains must be configured in the Virtual SAN user interface. After fault domains are configured, Virtual SAN will redistribute the components across server racks to eliminate the risk of a rack failure taking multiple objects offline. This feature is commonly referred to as “Rack Awareness”. The diagram below shows what this might look like with a 12-node Virtual SAN cluster spread across four server racks.
Configuring Virtual SAN fault domains is quite simple as demonstrated in this video (no audio): Virtual SAN Fault Domains
Virtual SAN Stretched Clusters provide organizations with the capability to deploy a Virtual SAN cluster across two locations. These locations can be opposite sides of the same data center, two buildings on the same campus, or geographically disbursed between two cities. It is important to note that this technology does have bandwidth and latency requirements as detailed in the Virtual SAN Stretched Cluster Guide and 2-Node Guide.
A stretched cluster provides resiliency against larger scale outages and disasters by keeping two copies of the data – one at each location. If a failure occurs at either location, all data is available at the other location. vSphere HA restarts any virtual machines affected by the outage using the copy of the data at the surviving location. In the case of disaster avoidance such as an impending storm or rising flood waters, virtual machines can be migrated from one location to the other with no downtime using vMotion.
Since Virtual SAN is a clustering technology, a witness is required to achieve quorum in the case of a “split-brain” scenario where the two locations lose network connectivity. A Virtual SAN witness is simply a virtual machine running ESXi. The witness is deployed at a third location (separate from the two primary data locations) to avoid being affected by any issues that could occur at either of the main sites.
The witness does not store data such as virtual disk (VMDK) objects. Only witness objects are stored in the witness virtual appliance. If any one of the three sites goes offline, there is still more than 50% of each object’s components online to achieve quorum and maintain availability.
Enabling deduplication and compression can reduce the amount of physical storage consumed by as much as 7x, resulting in a lower total cost of ownership (TCO). Environments with highly-redundant data such as full-clone virtual desktops and homogenous server operating systems will naturally benefit the most from deduplication. Likewise, compression will offer more favorable results with data that compresses well such as text, bitmap, and program files. Data that is already compressed such as certain graphics formats and video files, as well as files that are encrypted, will yield little or no reduction in storage consumption from compression. In other words, deduplication and compression results will vary based on the types of data stored in an all-flash Virtual SANenvironment.
Deduplication and compression is a single cluster-wide setting that is disabled by default and can be enabled using a simple drop-down menu. Note that a rolling format of all disks in the Virtual SAN cluster is required, which can take a considerable amount of time. However, this process does not incur virtual machine downtime and can be done online, usually during an upgrade. Deduplication and compression are enabled as a unit. It is not possible to enable deduplication or compression individually.
Deduplication and compression are implemented after write acknowledgement to minimize impact to performance. Deduplication occurs when data is de-staged from the cache tier to the capacity tier of an all-flash Virtual SAN datastore. The deduplication algorithm utilizes a 4K-fixed block size and is performed within each disk group. In other words, redundant copies of a block within the same disk group are reduced to one copy, but redundant blocks across multiple disk groups are not deduplicated.
The compression algorithm is applied after deduplication has occurred just before the data is written tothe capacity tier. Considering the additional compute resource and allocation map overhead ofcompression, Virtual SAN will only store compressed data if a unique 4K block can be reduced to 2K orless. Otherwise, the block is written uncompressed to avoid the use of additional resources whencompressing and decompressing these blocks which would provide little benefit.
The processes of deduplication and compression on any storage platform incur overhead and potentially impact performance in terms of latency and maximum IOPS. Virtual SAN is no exception. However, considering deduplication and compression are only supported in all-flash Virtual SAN configurations, these effects are predictable in the majority of use cases. The extreme performance and low latency of flash devices easily outweigh the additional resource requirements of deduplication and compression. The space efficiency generated by deduplication and compression lowers the cost-per-usable-GB of all-flash configurations.
RAID-5/6 erasure coding is a space efficiency feature optimized for all-flash configurations. Erasure coding provides the same levels of redundancy as mirroring, but with a reduced capacity requirement. In general, erasure coding is a method of taking data, breaking it into multiple pieces and spreading it across multiple devices, while adding parity data so it may be recreated in the event one of the pieces is corrupted or lost.
Unlike deduplication and compression, which offer variable levels of space efficiency, erasure coding guarantees capacity reduction over a mirroring data protection method at the same failure tolerance level. As an example, let’s consider a 100GB virtual disk. Surviving one disk or host failure requires 2 copies of data at 2x the capacity, i.e., 200GB. If RAID-5 erasure coding is used to protect the object, the 100GB virtual disk will consume 133GB of raw capacity – a 33% reduction in consumed capacity versus RAID-1 mirroring.
While erasure coding provides significant capacity savings over mirroring, understand that erasure coding requires additional processing overhead. This is common among any storage platform today. Erasure coding is only supported in all-flash Virtual SAN configurations. Therefore, performance impact is negligible in most use cases due to the inherent performance of flash devices. Also note that RAID-5 erasure coding (FTT=1) requires a minimum of four hosts and RAID-6 erasure coding requires a minimum of six hosts.
Virtual SAN has the ability to limit the number of IOPS a virtual machine or virtual disk generates. There are situations where it is advantageous to limit the IOPS of one or more virtual machines. The term “noisy neighbor” is often used to describe when a workload monopolizes available I/O or other resources, which negatively impact other workloads or tenants in the same environment.
An example of a possible noisy neighbor scenario is month-end reporting. Management requests delivery of these reports on the second day of each month so the reports are generated on the first day of each month. The virtual machines that run the reporting application and database are dormant most of the time. Running the reports take just a few hours, but this generates very high levels of storage I/O. The performance of other workloads in the environment are impacted while the reports are running. To remedy this issue, an administrator creates a storage policy with an IOPS limit rule and assigns the policy to the virtual machines running the reporting application and database. The IOPS limit eliminates the performance impact to the other virtual machines. The reports take longer, but they are still finished in plenty of time for delivery the next day.
Keep in mind storage policies can be dynamically created, modified, and assigned to virtual machines. If an IOPS limit is proving to be too restrictive, simply modify the existing policy or create a new policy with a different IOPS limit and assign it to the virtual machines. The new or updated policy will take effect just moments after the change is made.
Virtual SAN is optimized for modern all-flash storage with space efficiency features such as deduplication, compression, and erasure coding that lower TCO while delivering incredible performance. Hardware expenditures are further reduced for 2-node cluster configurations using directly connected crossover cables. This lowers network switch costs, reduces complexity, and improves reliability especially for use cases such as remote offices. The Virtual SAN iSCSI target service enables physical servers and application cluster workloads to utilize a Virtual SAN datastore. The performance and health services make it easy to verify Virtual SAN configurations and closely monitor key metrics including IOPs, throughput, and latency at the cluster, host, virtual machine, and virtual disk levels. Quality of service can be managed by using IOPs limits on a per-virtual machines and per-virtual disk basis. All of these services are precisely managed using VM-centric storage policies. Virtual SAN scales to 64 nodes per cluster with up to 150k IOPS per node using the latest hardware innovations such as NVMe. Deployment options include Virtual SAN Ready Nodes, Dell EMC VxRail turnkey appliances, and build-your-own. All of these utilize components certified by VMware and the leading hardware OEMs to simplify hyper-converged infrastructure deployment. This provides organizations a vast number of options to run any app, any scale on an enterprise-class platform powered by Virtual SAN.
Bonjour à tous,
Dans le cadre d'une création d'un support d'installation pour vSphere, il est possible de choisir un support CD/DVD ou bien un support USB qui est le plus simple et le plus rapide.
1- Récupérer l'image d'installation souhaitée, disponible via votre compte My VMware: https://my.vmware.com/fr/web/vmware/login
2- Télécharger un logiciel gratuit de création de support USB: http://www.isotousb.com/isotousb_setup.exe
3- Choisir un formatage en FAT32 et ne pas cocher la case "Bootable, ..."
4- Sélectionner l'image de vSphere et la clé USB dans la liste
5- Cliquer sur Burn
La clé USB est prête à l'emploi.